01
Property & zoning
Confirm the property can support the proposed secondary suite and identify any site-specific zoning issue.
Planning a new basement apartment or trying to legalize an existing one? iPermit reviews the property and permit history, checks the approval path, prepares permit drawings and coordinates required engineering and municipal submission support.
A legal basement apartment is typically treated as a secondary suite: a self-contained additional dwelling unit within the main residential building. That is different from simply finishing a basement for use by the main household.
When the space is intended to function as its own unit, the property, existing house, proposed layout and building systems need to be reviewed together. Zoning, Building Code, fire-safety, electrical and municipal requirements can all affect the design and approval path.
iPermit handles both new basement-suite projects and existing basement apartments that need to be reviewed for legalization. We start by determining what is already built, what permit history exists and which compliance path applies before defining the drawing package.
The municipality and other applicable authorities make the final decisions. iPermit prepares and coordinates the work within the agreed scope; permit approval and municipal review dates cannot be guaranteed.
There is no reliable one-size-fits-all eligibility checklist. The answer depends on the property address, municipality, house configuration, age and permit history of the existing work, intended layout and any structural or building-system changes.
A limitation in one area does not automatically mean the project cannot proceed. It may change the layout, require additional construction or add another approval step.
The right permit package comes from the property and existing conditions—not from selling every basement the same checklist.
Confirm the property can support the proposed secondary suite and identify any site-specific zoning issue.
Determine what basement work, entrances or plumbing were previously approved and what still needs review.
Review ceiling height, exits, fire separation, smoke/CO alarms and other applicable safety requirements.
Identify structural openings, underpinning, plumbing, HVAC or electrical work that may require additional design or approvals.
The correct scope depends on whether you are creating a new unit, legalizing existing work, changing the structure or responding to a municipal issue.
Planning a new self-contained basement apartment before construction begins.
A basement apartment already exists and needs a permit-history and compliance review.
New foundation openings, walkouts, beams or other structural changes can change the permit scope.
Insufficient headroom may require layout changes or separate structural assessment before the design is finalized.
Existing notices, comments or inspection issues need a problem-specific review before the file can move forward.
A legal basement apartment is typically treated as a secondary suite: a self-contained additional dwelling unit within the main residential building. That is different from simply finishing a basement for use by the main household.
When the space is intended to function as its own unit, the property, existing house, proposed layout and building systems need to be reviewed together. Zoning, Building Code, fire-safety, electrical and municipal requirements can all affect the design and approval path.
iPermit handles both new basement-suite projects and existing basement apartments that need to be reviewed for legalization. We start by determining what is already built, what permit history exists and which compliance path applies before defining the drawing package.
The municipality and other applicable authorities make the final decisions. iPermit prepares and coordinates the work within the agreed scope; permit approval and municipal review dates cannot be guaranteed.
The details vary by municipality and existing conditions, but the work should move from a verified starting point to coordinated drawings and a clear municipal response.
Confirm the address, current basement use, existing work and any permits, inspections or notices already on record.
Check the proposed unit, ceiling height, entrance strategy and property constraints before detailed design is locked in.
Prepare existing and proposed plans and coordinate structural, HVAC or plumbing input where the project requires it.
Assemble the municipal package, submit where authorized and respond to review comments that fall within the agreed scope.
Not every basement project needs every discipline. These services are added only when the property or proposed work requires them.
For a new basement door, walkout or below-grade stair involving excavation, drainage or structural openings.
Existing and proposed plans prepared around the basement layout, permit application and project-specific technical requirements.
For the broader submission, review-comment and timing stages without duplicating the full process on this service page.
These issues are better resolved before detailed drawings are locked in because they can change the design, supporting documents or approval route.
Not always. A dedicated exterior entrance is common, but a shared exit can be acceptable in some configurations when the applicable fire-separation and alarm requirements are met.
No. The 1.95 m dimension is relevant to certain existing-house compliance provisions, but it is not a universal rule. The applicable requirement depends on the building, existing conditions and code path.
No. Regulated electrical work follows a separate Electrical Safety Authority notification and inspection process. It should be coordinated with the basement project rather than treated as part of the municipal building permit.
Send the complete notice, permit records, drawings and any inspection correspondence. The correct next step depends on what was built and what the authority is asking for.
A legal basement apartment is typically treated as a secondary suite: a self-contained additional dwelling unit within the main residential building. That is different from simply finishing a basement for use by the main household.
When the space is intended to function as its own unit, the property, existing house, proposed layout and building systems need to be reviewed together. Zoning, Building Code, fire-safety, electrical and municipal requirements can all affect the design and approval path.
iPermit handles both new basement-suite projects and existing basement apartments that need to be reviewed for legalization. We start by determining what is already built, what permit history exists and which compliance path applies before defining the drawing package.
The municipality and other applicable authorities make the final decisions. iPermit prepares and coordinates the work within the agreed scope; permit approval and municipal review dates cannot be guaranteed.
Send project context first, the next step can then focus on scope, information gaps and the right page or service route.
You do not need a completed drawing package to start. The first review should establish what exists now, how the basement is intended to be used and what municipal history is already available.
Focused answers to common basement-apartment and secondary-suite questions. Cost and overall timeline are kept brief because those topics have dedicated iPermit guides.
An existing basement apartment should not be assumed to be legal simply because it has been occupied or rented. Permit history, previous inspections and current condition need to be reviewed to determine the correct compliance path.
A basement apartment is typically a secondary suite located in the basement of the main house. “Secondary suite” is the broader term for a self-contained additional dwelling unit within the building.
No. A dedicated exterior entrance is common but not universal. The acceptable exit arrangement depends on the layout and applicable Building Code requirements.
Not for every project. Engineering is commonly required when work affects load-bearing elements, foundation openings, beams, underpinning or other structural construction.
The total depends on the municipality and whether the project needs only permit drawings or additional structural, HVAC, plumbing, entrance or existing-condition work. See Building Permit Cost for the dedicated cost discussion.
The schedule can include existing-condition verification, design, municipal review and revisions. See Building Permit Process for the broader timing factors. iPermit does not guarantee municipal review or approval dates.